Paver Cleaning & Sealing
Your Local & Trusted Paver Cleaning & Sealing Company In Rockledge, Viera, Melbourne, Merritt Island, Cocoa Beach, Cocoa, Titusville, Indialantic, Satellite Beach, Cape Canaveral, and Surrounding Areas
What are the Benefits of Sealing Pavers
1. Color Enhancement
Sealing your pavers will enhance, preserve, and protect their natural colors from fading caused by harmful Florida UV Rays. We offer two different types of enhancement, Natural and Wet Look. Natural will offer minimal change in appearance and Wet Look will make the pavers look as though they are wet. To enhance curb appeal of the property. It gives homeowners pride when the appearance of their home is improved.
When bricks, travertine, and concrete are properly sealed, you are putting a barrier between its surface and anything that can stain it such as grease, oil, transmission fluid, hydraulic fluids, iron deposits, and anything else. Adding a protective barrier will help prevent those unsightly stains commonly found on driveways. Sealing will also keep pavers from becoming pitted and worn looking.
3. Sand Stabilization
Our process allows for superior sand joint stabilization. Stabilizing the sand is optional because it will help to eliminate weed growth, insect intrusion, and sand washout. The process also helps to prevent the bricks from shifting.
4. Algae & Mold Inhibitor
Sealing concrete, travertine, or brick pavers will inhibit algae and mold growth. Our sealers dry quickly and keep moisture from penetrating the pores of each surface. Moisture is the #1 cause of mold and mildew growth.
Maintaining your sealed pavers becomes much easier once it's been sealed. Mold, bird droppings, and small spills can usually be cleaned up with a mild detergent soap and a garden hose.
One sealer does not fit all projects, let our experience help you choose the correct sealer for your project. Driveways, walkways, pool decks, patios, and more, we’ll help you keep it looking great for years and years to come.
At Stellar Paver Sealing, we offer quality over quantity. To achieve quality, we take our time, use the best tools, products, technics and are always educating ourselves to master our craft. We want your pavers to get a beautiful finish but overall durability and longevity.
Analysis: We evaluate the condition of your pavers, measure the areas, recommend any repairs that are needed and provide a written proposal.
Deep Clean: We clean with high pressure water and a rotary surface cleaner for deep cleaning, along with a broad spectrum fungicidal agent to kill any mildew or algae that is growing on the surface and in the joints. There may be some stains that cannot be removed, but we carry several detergents to attack and remove the ones that can.
Paver Prep: Clean stabilizing joint sand is then washed into the joints to fill them to approximately 1/8 inch below the chamfer edge. Sand is very important in the joints. Don’t let anyone seal your pavers without replacing the sand that was washed out!
Seal: Apply 2 coats of high quality paver sealer to enhance the colors your pavers and lock in the sand. Paver sealers we use is an excellent sand stabilizer, it chemically bonds the sand to itself and the pavers to minimize weed growth, ant intrusion and washouts. Your pavers are less likely to shift and sink when the sand is stabilized.
Clean Up: Lastly we clean up and block off any necessary areas with caution tape.