Premier Paver Sealing Services in Brevard County, FL

We can seal all types of pavers in Brevard County, FL but we focus on concrete, travertine, and clay brick.

Both methods of paver restoration are similar. However, HOAs more frequently support color restoration because it suggests that you’re restoring the natural color.

This is one of the most common question we usually get. Using a water-based sealer allows the pavers to breathe which prevents moisture entrapment. It’s also low VOC and durable.

We remove stains using specialized cleaners such as degreasing agents, algaecides, and oxide removers. Then we power wash away the residue.

The sanding and restoration steps are when we spread sand over the pavers. We sweep it into the joints and use hydrocompaction to make them as stable as possible. This also keeps weeds away.

We apply two coats of sealers during the sealing process. If you want more color or protection, we’ll apply a third layer.

The first coat takes half an hour to an hour. The final coat takes 24-48 hours to cure.

We offer sealants with a matte look to restore the natural look. The other choice is a semi-gloss finish that enhances the color and creates a wet look.

We’ll make sure you get the best sealing benefits by carefully inspecting our work. We’ll then seal the area off with caution tape.

Yes, we’ll use a reclamation system to collect runoff material. We’ll then dispose of it in accordance with EPA regulations.

We can fix minor flaws like chips and cracks. We also remove the pavers and compact the ground to remove bumps and reseat the paving. We then add sand between the joints.

We handle paver tinting in Brevard County, FL, by carefully mixing the colorant and sealant. We recommend a dilution of 30%-40% of the tint to enhance the color naturally.

Yes, the sealing process is suitable for all types of pavers in Brevard County, FL. We choose the best product for your needs.

• Reapply sealer every two or three years
• Clean using water and mild detergent